Taiwan

ESP32-CAM開發板 帶OV2640攝影模組

Ai-Thinker版本

※ 32位元CPU，可作應用處理器

※ 主頻高達240MHz，運算能力高達 600 DMIPS

※ 內置 520 KB SRAM，外置4M PSRAM

※ 支持UART/SPI/I2C/PWM/ADC/DAC等接口

※ 支持OV2640和OV7670攝像頭，內置閃光燈

※ 支持圖片WiFi上傳

※ 支持TF卡

※ 支持多種休眠模式

※ 內嵌Lwip和FreeRTOS

※ 支持 STA/AP/STA+AP 工作模式

※ 支持 Smart Config/AirKiss 一鍵配網



DESCRIPTION

The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.

The ESP32CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. It also features a LiPo charger (IP5306) , so your ESP32CAM project can be battery-powered and truly wireless. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.

 FEATURES

l ESP32 specifications

¡ Dual-core Tensilica LX6 microprocessor

¡ Up to 240MHz clock frequency

¡ 520kB internal SRAM

¡ 4MB Flash memory

¡ Integrated 802.11 BGN WiFi transceiver

¡ Integrated dual-mode Bluetooth (classic and BLE)

¡ Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)

l CP2104 USB TTL

l OV2640 sensor

¡ Output Formats(8-bit):

n YUV(422/420)/YCbCr422

n RGB565/555

n 8-bit compressed data

n 8-/10-bit Raw RGB data

¡ Maximum Image Transfer Rate

n UXGA/SXGA: 15fps

n SVGA: 30fps

n CIF: 60fps

¡ Scan Mode: Progressive

l Camera specifications

¡ CCD size : 1/4inch

¡ Field of View : 78 degree

¡ Maxmium Pixel: 200W

l Sensor best resolution: 1600 * 1200

l Dimension: 25mm x 24mm

l Weight: 5g

 

