卖樹莓派 配件: ENC28J60 OVERLAYS HAT for Raspberry Pi 通用 擴展板最好的价格

TW12631 ENC28J60 OVERLAYS HAT for Raspberry pi (103990283) ====================== ※本產品原廠代理從國外進口，有些交期較長，下訂前請詢問！ ============= Description For Pi Zero Generation, no NIC is inconvenient, because its core system is Linux, most of operations are based on Linux’s command line via ssh service, so a Network Adapter is required. The Pi zero Enc28j60 is a simple Network Adapter module for Pi zero It is very easy to assemble and configure. It allows your Raspberry Pi zero to access the network smoothly, and it is easy to do system updates and software installation operations. Features Easy to assemble Easy to setup Official OS overlay support Stable and fast How to configure it 1. Install the NIC module into the raspberry Pi. 2. Connect the network cable to ensure that your router supports DHCP and works well. 3.Burn the Raspbian image to TF card. 4. Edit the /boot/config.txt file by your favorite editor such as"nano"or"vim.tiny", and add the following parameter: 1 dtoverlay=enc28j60 Then save the exit and reboot the raspberry Pi. NOTE The module is tested only in raspbian environments. Technical Details Dimensions 65.5mm x 30mm x 23.5mm Weight G.W 15g Battery Exclude