产品描述
#64位元#BCM2387B0#Broadcom#raspberrypi#樹莓派
樹莓派主機板 Raspberry Pi 3 Model B+
This new and improved version of the third generation model maintains the same popular board format as the Raspberry Pi B+, 2, and 3 but boasts an even faster 1.4GHz 64Bit SoC, and the addition of 5GHz WiFi, faster Ethernet & POE capability (via POE HAT sold separately).
Please Note. It is recommended to use a 2.5A Power Supply with the Raspberry Pi 3 B+. This purchase is for the Raspberry Pi 3 Model B+ Board only.
Specifications
Processor
Broadcom BCM2837B0 chipset.
1.4GHz Quad-Core ARM Cortex-A53 (64Bit)
Connectivity
2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
4 × USB 2.0 ports
GPU
Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode.
Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
Memory
1GB LPDDR2
Operating System
Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT
Dimensions
85 x 56 x 17mm
Power
5V/2.5A DC via micro USB connector
5V DC via GPIO header
Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Connectors
Ethernet
10/100 BaseT Ethernet socket
Video Output
HDMI (rev 1.3 & 1.4)
Composite RCA (PAL and NTSC)
Audio Output
Audio Output 3.5mm jack
HDMI
USB 4 x USB 2.0 Connector
GPIO Connector
40-pin 2.54 mm (100 mil) expansion header: 2×20 strip
Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply
Camera Connector
15-pin MIPI Camera Serial Interface (CSI-2)
Display Connector
Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
Memory Card Slot
Push/pull Micro SDIO
處理器 Broadcom BCM2837B0，Cortex-A53 64位SoC @ 1.4GHz
記憶體 1GB LPDDR2 SDRAM
通訊 2.4GHz和5GHz IEEE 802.11.b / g / n / ac無線LAN，藍牙4.2，BLE
透過USB 2.0連接乙太網（最大流量300Mbps）
4個USB 2.0連接埠
GPIO 40(2 x 20)pins
多媒體 HDMI x1
MIPI DSI顯示螢幕連接埠 x1
MIPI CSI攝影機連接埠 x1
3.5mm jack x1
